Minolta magicolor 7300 User Manual page 110

29
With your left hand, pull the handle of
the lock lever toward you, and then
insert the left end of the lock lever into
the holder in the printer.
Attention
The handle of the lock lever must
be pulled out before attaching the
lock lever. If you try attaching the
lock lever without first pulling out
the handle, the end of the lock
lever cannot be correctly inserted.
This printer is equipped with a lock lever
installation indicator that partially covers
the lock lever holder. The lock lever
installation indicator
that the lock lever holder is revealed
when the end of the lock lever is
inserted, indicating that the lock lever
has been correctly installed. It is not
necessary for the user to operate the
lock lever installation indicator.
30
Move the handle of the lock lever
toward the printer to secure the print
units.
If the print units' lock lever
and handle are not correctly
positioned, the front door
cannot be closed.
102
is designed so
Replacing a Print Unit Assembly