Minolta magicolor 7300 User Manual page 118

5
Remove the C-clip
6
Remove the, collar
media pickup roller
shaft.
7
Remove the new media pickup roller
from its packaging.
8
Place the used media pickup roller in the box and plastic bag that the new
roller came in.
WARNING!
Do not throw it into a fire.
Attention
Contact toner_recycle@minolta-qms.com for recycling or
disposal information.
9
Slide the collar and the new
media pickup roller onto the
shaft as far as possible, making
sure that the notch in the shaft at
the front of the media pickup
roller can be seen.
During installation, be
careful not to touch the
surface of the roller.
110
securing the media pickup roller.
and the
from the
Replacing Media Pickup and Separator Rollers