6
Insert the end of the wire-releas-
ing tool into the position in the
wire lock shown in the illustra-
tion.
When the wire-releasing tool
is inserted, the wire is
unhooked and wound up in
the duplex unit with a
spring-like force.
Attention
The wire cannot be unhooked if the right-side door of the printer is
open. Be sure to close the right-side door before unhooking the wire.
7
Open the cover of the duplex
unit.
8
Lift up the duplex-unit-locking
hook on the inside of the
right-side door, and then slowly
open the duplex unit about 1.2
in. (30 mm).
Attention
After the duplex-unit-locking
hooks are lifted up, the duplex
unit is unlocked. Support the
duplex unit so that it does not fall.
142
Uninstalling Duplex Unit Kit