Controller - Minolta magicolor 7300 User Manual

Controller

CPU
Resident
emulations
Fonts
Standard
interfaces
RAM
Optional RAM
Job
Accounting
Support
Controller
Software
Requirements
IBM, Power PC 405 Core (266 MHz)
PostScript—Level 3
PDF—1.3 Direct PDF Printing (hard disk required)
Type 1, Type 3, Agfa, CID, FSM, and TrueType
Ethernet—10BaseT/100BaseTX
Parallel—Centronics/IEEE 1284 bidirectional
USB—USB (version 1.1) Type B connector (PC only)
Type: PC-133-Compliant SDRAM DIMMs
Base system RAM: 128 MB
Total RAM: Upgradable to 512 MB
128 and 256 MB DIMMs
For information about DIMMs recommended for your
printer, see the magicolor 7300 Answer Base
(www.minolta-qms.com - Click on "24-Hour Online Help"),
or contact Technical Support. See the Service & Support
Guide on the Documentation CD-ROM for sources of
service and support for many areas of the world. For the
most up-to-date worldwide information, check
www.minolta-qms.com.
PageScope Light (printer-based service management,
web interface for the device administrator)
PageScope Net Care (server-based management for the
network/office administrator)
Printer-based Accounting (hard disk required)
AIDC
Agfa Balanced Screens for halftones
Microsoft Plug & Play
SNMP support
213