Minolta magicolor 7300 User Manual page 213

This message...
MEDIA SIZE ERR
ADD Y
MEDIA SIZE ERROR
ADD Y
MEMORY FULL
PRESS CANCEL
NO MANUAL FEED
CHECK UNIT
MANL EMPTY
ADD Y
Control Panel Messages
means...
The media size (Y)
set with the printer
driver and the type/
length of media
loaded into the tray
did not match during
printing. Or, media
out is detected during
printing, and a user
loaded media which is
different size than
desired.
An incorrect media
size has been
detected in the
specified tray.
The printer has
received more data
than can be
processed by its
internal memory.
The manual feed tray
is not available.
The manual feed tray
is empty.
do this...
Remove the media from
the specified tray and
install the correct media
size, or change the
printer driver setting.
Then, Printing begins
when media is loaded.
Remove the media from
the specified tray and
install the correct media
size, or change the
printer driver setting.
Then, Printing begins
when the correct media
is loaded.
Press the Cancel key to
clear this message. If
necessary, you can also
decrease the amount of
data to be printed (for
example, by decreasing
the resolution), and then
try printing again, or you
can install an optional
memory module.
Install the duplex unit
with the manual feed
tray. The manual feed
tray is necessary in
duplex printing, even if
media is being fed from
Trays 1–4.
Insert supported size
media in the manual
feed tray
205