Warning Status Messages - Minolta magicolor 7300 User Manual

This message...
LIGHT SLEEP
PROCESSING
READY
STANDBY MODE
WARMING UP

Warning Status Messages

This message...
ADJUST TRAYS
ADJUST TRAY Y
Control Panel Messages
means...
The printer is in the
Energy Saver light
sleep mode. While in
"deep sleep," the
printer's message
window will not
display operator
status.
The printer has a
job(s) to be printed.
The printer is on and
ready to receive data,
and no jobs are being
processed.
The printer is in an
Energy Saver
standby mode and is
preheating.
The fuser is warming
up.
means...
No media tray has
been detected or the
media trays are not
correctly installed.
No specified media
tray (Y=1-4 ) has
been detected, or the
specified media tray
is not correctly
installed.
do this...
The printer remains in
the Energy Saver sleep
modes until a print job is
received, or until the
printer is manually
turned off then on again.
Wait. No action needed.
No action needed.
Wait. No action needed.
Wait. No action needed.
do this...
Check to see that the
media tray has been
correctly installed.
Check to see that the
specified media tray has
been correctly installed.
203