Power Requirements - Minolta magicolor 7300 User Manual

Power Requirements

WARNING!
Connect the power plug to an outlet with the same rated voltage as the
printer. No other devices should be connected to this outlet, as
overheating could cause fire or electric shock. The printer draws 14 A at
100 V, 12 A at 120 V, or 6.5 A at 220–240 V. Your printer requires a
properly grounded AC outlet. The grounding terminal on the power
cable should be connected to a good earth ground to prevent electric
shock and fire.
Input Power
Voltage
Fluctuation
Rate and Rated
Line Voltage
Frequency
Variation Rate
Maximum
Electrical
Current
Noise-
generating
Equipment
Grounding
Notes:
Requirements
Japan
North America 120 VAC ±10%; 50/60 Hz ±3%
Europe
Latin America
Notes: Amperage capacity is at least 1.2 times that used
by the printer.
Japan
North America 120 VAC ±10%
Europe
Latin America
Notes: 10% of the rated line voltage for proper operation.
Within 50–60 ±3 Hz
Required during operation is 14 amps for a 100 V system,
12 amps for a 120 V system and 6.5 amps for a 220–240 V
system.
Should not be connected to the same electrical outlet as
the printer.
Your printer requires a properly grounded AC outlet.
In compliance with UL guidelines, "The appliance inlet is
considered to be the main disconnect device."
100 VAC ±10%; 50/60 Hz ±3%
220–240 VAC ±10%; 50/60 Hz ±3%
120 VAC ±10%; 50/60 Hz ±3%
220–240 VAC ±10%; 50/60 Hz ±3%
100 VAC ±10%
220–240 VAC ±10%
120 VAC ±10%
220–240 VAC ±10%
215