Minolta magicolor 7300 User Manual page 196

Symptom Cause
Media is The wrong media tray is
jamming. used.
The media is not
correctly positioned in
the tray.
The number of sheets in
the tray exceeds the
maximum allowed.
The media guides are
not correctly adjusted to
the media size.
Warped or wrinkled
media is loaded in the
tray.
The media is moist from
humidity.
Unsupported media
(wrong size, thickness,
type, etc.) is being used.
The recommended
transparency (OHP) or
label media are facing
the wrong way in the
tray.
Transparency (OHP)
media is collecting static
electricity.
Not all pages The printer has the
print. wrong kind of cable, or
the printer is not
configured for the
correct cable and port.
The Cancel key was
pressed.
The media tray is
empty.
188
Solution
Envelopes, labels, postcards, thick stock
over 25 lbs (90 g/m
can be printed only from Tray 1 or the
optional manual feed tray.
Remove the jammed media and reposition
the media properly in the tray. Load
transparencies or labels according to the
manufacturer's instructions.
Remove the excess media and reload the
correct number of sheets in the tray.
Adjust the media guides in the tray to
match the size of the media.
Remove the warped or wrinkled media and
replace it with new media.
Remove the moist media and replace it
with new, dry media.
Use media that is approved for your printer.
See "Media Types" on page 15.
Load the transparencies or labels
according to the manufacturer's
instructions.
Do not fan transparencies before loading
them. Remove transparencies from the
output tray as soon as they print.
Check the cable.
Make sure no one presses the Cancel key
while your job is printing.
Check the message window to see if the
tray you are using is out of media.
2
), and transparencies
Solving Problems