Envelopes - Minolta magicolor 7300 User Manual

Envelopes

Capacity
Orientation Tray 1
Type
Driver
Mode
Duplexing
Use envelopes that are
Common office envelopes approved for laser printing
Made with diagonal joints, sharp folds and edges, and ordinary gummed
flaps
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Dry
To be printed on the front address side only
Do not use envelopes that have
Sticky flaps
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips
for sealing
Transparent windows
Too rough of a surface
Material that will melt, vaporize, offset discolor, or emit dangerous fumes
Been presealed
18
Tray 1 Up to 50 envelopes, depending on their
thickness
Trays 2–4 Not supported
Manual 1 envelope at a time
Feed Tray
Face up
Manual Face down
Feed Tray
Check www.minolta-qms.com (click on "24-Hour Online
Help") for currently approved media.
Envelope
Not supported
Media Types