Attention
Do not touch the wire harness or
connectors on the inside of the
right-side door; otherwise, the
electronic parts of the printer may
be damaged by static electricity.
Do not touch the connectors on the
manual feed tray or its installation
compartment; otherwise, the
electronic parts of the printer may
be damaged by static electricity.
1
Pull up the lock release lever to
open the right-side door.
2
Check that the media can be
seen below the transparent
paper guide
right-side door.
If the media can be seen,
continue with step 3.
If the media cannot be seen,
skip to step 6.
172
inside the
Clearing Media Jams