Minolta magicolor 7300 User Manual page 187

How do I remove a media jam in Trays 2–4 (standard and
optional lower feeder unit trays)?
The following illustrates a media jam in Tray 2; use the same
instructions for Trays 3 and 4.
1
Pull up the lock release lever to
open the right-side door.
Attention
Do not touch the wire
harness or connectors on
the inside of the right-side
door; otherwise, the
electronic parts of the
printer may be damaged
by static electricity.
2
Check to see if the media can be seen below the transparent paper
guide
If the media cannot be seen, close the right-side door, and then continue
with step 3.
If the media can be seen, skip to step 7.
Clearing Media Jams
inside the right-side door.
179