Minolta magicolor 7300 User Manual page 144

10
Pull up the lock release lever to open the right-side door.
Make sure that the
wire on the duplex
unit is hooked onto
the printer.
11
Close the right-side door.
12
Connect the white connector on
the duplex unit with the white
connector on the printer, and
connect the black connector on
the duplex unit with the black
connector on the printer.
13
Close the cover of the duplex
unit.
14
Attach the duplex unit connector
cover
15
In order to prevent the
wire-releasing tool
used to remove the duplex unit
from the printer, from being lost,
attach it to the connector cover.
16
Proceed to the next step,
"Installing the Manual Feed
Tray."
136
.
, which is
Duplex Unit Kit