Minolta magicolor 7300 User Manual page 244

Printer Body
Do This...
Perform only the procedures that are described in this manual. Using the
machine improperly can result in a fire or an electric shock.
Notes on your safety and operating safety
Working improperly with the printer can result in health hazards, electric
shocks and even fires. Before you unpack the laser printer, you should
make yourself familiar with this information on your safety and operating
safety.
If the machine becomes unusually hot, or if you notice smoke or an unusual
odor coming from the machine, switch it off immediately and remove the
power cord from the socket.
DO NOT...
Do not place:
Heavy objects on the machine.
Magnetic objects near the machine.
Coffee cups, drinks, bottles, or other containers with liquids in
them on the machine. If liquid enters the machine the result could
be an electric shock or a fire. If liquid does get into the machine,
switch it off immediately, disconnect the power cord. Paper clips,
staples, or other small metal objects into openings on the
machine. The result could be an electric shock or a fire. If m
pieces are fed into the machine, switch it off immediately, disconnect the
power cord.
Do not open any covers on the machine while printing is in progress.
Do not use any flammable sprays, liquids or gases in the vicinity of the
machine.
Do not remove any safety devices and do not alter the construction of the
machine. The unit is equipped with high-voltage components. Using the
machine improperly can result in a fire or an electric shock.
236 Working Safely with Your Laser Printer
etal