Minolta magicolor 7300 User Manual page 154

5
Firmly connect the cable of the
hard disk drive to connector
CNHDD on the printer controller
board.
6
Slide the hard disk drive to the right so that bracket on the hard disk drive
enters the slot on the printer frame.
Check that the end of the bracket on the hard disk drive
the slot on the printer frame
7
Tighten the
mounting screw
to secure the hard
disk drive.
8
Attach the printer's
left-side cover.
9
Connect the power
supply cord and
interface cable(s),
and then turn on the
printer.
10
Check the
configuration page
from the control
panel (Print
Menu/
Configuration
menu) to verify that
the hard disk is
listed.
146
.
Internal IDE Hard Disk Drive
is secured by