Minolta magicolor 7300 User Manual page 206

Symptom
Irregular
print or
mottled
image
appears.
There is
insufficient
fusing or the
image
comes off
when
rubbed.
198
Cause
The media is moist
from humidity.
The humidity in the
media storage area
may be too high.
Media with
specifications not
covered by the printer
warranty is being
used.
One or more of the
toner cartridges are
defective.
One or more of the
print units may have
been incorrectly
installed or are
defective.
The media is moist
from humidity.
Media with
specifications not
covered by the printer
warranty is being
used.
The media type may
be incorrectly set.
Solving Problems—Printing Quality
Solution
Remove the moist media and replace it
with new, dry media.
Adjust the humidity in the media
storage area.
Use media that is covered by the
printer warranty. For the most
up-to-date information globally, check
www.minolta-qms.com.
Remove the toner cartridge(s) and
check for damage. If damaged, replace
it (them).
Reinstall the print unit(s). If damaged,
replace it (them).
Remove the moist media and replace it
with new, dry media.
Use media that is covered by the
printer warranty. For the most
up-to-date information globally, check
www.minolta-qms.com.
When printing envelopes, labels, thick
stock, and transparencies, the
appropriate media type must be
specified in the printer driver.