Settings For Server Direct Print - Epson TM-U220-i Technical Reference Manual

Settings for Server Direct Print

Set up Server Direct Print using EPSON TMNet WebConfig.
This section briefly explains the setup procedure.
1. Connect this product to a network
Connect this product to a network and turn on the product.
2. Start EPSON TMNet WebConfig
Access the address bar of the Web browser on the PC for setting to start EPSON TMNet WebConfig.
When SSL is disabled: http://[This product's IP address]/webconfig/
When SSL is enabled:
( U "Starting EPSON TMNet WebConfig" on page
3. Set up Server Direct Print
Select the [Web Service Settings] menu and then [Direct Print], and set Server Direct Print settings.
After setting, click [Apply] at the bottom of the screen. Then the settings are written to the product. If
[Apply] is not clicked, the settings are not applied.
( U "Web Service Settings - Server Access - Direct Print" on page
72
https://[This product's IP address]/webconfig/
97)
107)