The Print Settings Menu Is Not Displayed (Mac Os); Cannot Solve Problem; Cannot Solve Printing Problems - Epson WF-2110 Series User Manual

Solving Problems

The Print Settings Menu is Not Displayed (Mac OS)

The Epson Printer Driver has Not been Installed Correctly.
Solutions
If the Print Settings menu is not displayed on macOS Catalina (10.15) or later, macOS High Sierra
(10.13), macOS Sierra (10.12), OS X El Capitan (10.11), OS X Yosemite (10.10), OS X Mavericks (10.9),
the Epson printer driver has not been installed correctly. Enable it from the following menu.
Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax),
remove the printer, and then add the printer again.
macOS Mojave (10.14) cannot access Print Settings in applications made by Apple such as TextEdit.

Cannot Solve Problem

If you cannot solve the problem after trying all of the solutions, contact Epson support.
If you cannot solve printing problems, see the following related information.
Related Information
"Cannot Solve Printing Problems" on page 123
&

Cannot Solve Printing Problems

Try the following solutions in order starting at the top until you solve the problem.
❏ Make sure you match the paper type loaded in the printer to the paper type settings in the printer driver.
❏ Use a higher quality setting on the printer driver.
❏ Reinstall the ink cartridges already installed in the printer.
Reinstalling the ink cartridges may clear clogging in the print head nozzles and allow the ink to flow smoothly.
However, because the ink is consumed when the ink cartridge is reinstalled, a message asking you to replace the
ink cartridge may be displayed depending on the amount of ink remaining.
"It is Time to Replace the Ink Cartridges" on page 107
❏ Align the print head.
"Aligning the Print Head" on page 54
❏ Run a nozzle check to see if the print head nozzles are clogged.
If there are missing segments in the nozzle check pattern, the nozzles may be clogged. Repeat head cleaning and
the nozzle check alternately 4 times and check if the clogging has cleared.
Note that print head cleaning uses some ink.
"Checking and Cleaning the Print Head" on page 50
❏ Turn off the printer, wait for at least 6 hours, and then check if the clogging has cleared.
If the problem is clogging, leaving the printer for a while without printing may solve the problem.
You can check the following items while the printer is off.
> >

Cannot Solve Problem

Cannot Solve Printing Problems
123