Changing The Initial Value Of Each Function - Oki MB492dn User Manual

Changing the Initial Value of Each Function

You can change settings that require administrative privileges on the following menus.
Administrator Setup
"Copy Function"
Copy Setup
"Fax Function"
Fax Setup
"Internet Fax Function"
Internet Fax Setup
"Scanner Function"
Scanner Setup
"USB Memory Print Function"
Print From USB Memory Setup
"Printer Function"
Print Setup
"Network Management"
Network Menu
"Management"
Management
"Operation Initial Setting"
User Install
1.
Press [Device Settings] on the touch panel.
2.
Press [Easy Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Press [OK].
5.
Select a menu that has the setting you want to change.
6.
Set other menus if necessary.
7.
Press [OK].
Memo
If you have made a change to initial values from the [Admin Setup] menu and wants to reflect the new values immediately on the
Start screen, press [RESET] or press one of the following function switch buttons, the
the (PRINT) button, or the (FAX) button.
1123
(COPY) button, the (SCAN) button,