Printing The Fax Communication Results (Communication Management Report) - Oki MB492dn User Manual

Printing the Fax Communication Results (Communication Management Report)

The setting at the factory default, the fax communication reports are printed automatically.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Fax Setup].
6.
Press [Fax Setting].
7.
Check that [A/R Full Print] is set to [ON].
If you do not want to print, set to [OFF].
Memo
Pressing [A/R Full Print] switches between [ON] and [OFF].
8.
Press [Back] until the home screen is displayed.
When you send a fax, communication management report is printed.
1118