Selecting Finishing Mode; Finishing Modes And Optional Finishing Devices - Oki ES7480DFN Manual

Hide thumbs

Table Of Contents

Table of Contents

Select the desired copy paper size, and

then press [OK].

Note

• If you want to select a paper size other than the

following, you need to register the size as "OTHER"

size. In this case, register it in a landscape direction.

Once you register this size, it will be specified every

time you press [OTHER] on the touch panel.

Other than North America: A4, A5, B5

North America: Letter, Legal

For how to register it, see the following page:



P.49 "Registering paper sizes to "OTHER" size"

Select other copy modes as required, and

then press the [START] button on the

control panel.

If "NON-SORT NON-STAPLE" is selected as a sorting

mode, scanning of the original starts. If another sorting

mode is selected, follow the procedure below.

Place the next original, and then press

[NEXT COPY] on the touch panel or the

[START] button on the control panel.

Scanning of the next original starts. If you have more than

one original, repeat this step until the scanning of all the

originals is finished.

When the scanning of all the originals is

finished, press [JOB FINISH] on the touch

panel.

Copying starts.

 Setting photo originals in other sizes

Press [CUSTOM] on the touch panel.

Key in the size of the original.

1) Press [X] on the touch panel and key in its width within

10 to 434 mm (0.39" to 17.09").

2) Press [Y] on the touch panel and key in its length

within 10 to 300 mm (0.39" to 11.81").

3) Press [OK] on the touch panel.