IBM pSeries 630 6C4 Service Manual page 509

11. From the bottom of the processor assembly, lift the side access cover. Four hinges hold the cover to
the top of the processor assembly. Pivot the cover up to reveal the memory DIMMs or DIMM
connectors.
12. Remove all memory DIMMs as described in "Memory DIMM Removal" on page 492. Put the DIMMs
in a safe place (you will need to install these DIMMs onto the new processor card).
Model 6C4 Processor Card
1 Service Access Cover
2 Processor Access Cover
3 Processor Assembly Lifting and
Release Handles
4 Processor Assembly
5 Processor Card
6 Memory DIMMs
7 Model 6C4
8 Optional Media Device (for example:
Diskette Drive or Tape Drive)
9 IDE CD-ROM Drive
10 Front Bezel
11 Media Device Support Shelf
12 Processor Filler
Chapter 9. Removal and Replacement Procedures
489