IBM pSeries 630 6C4 Service Manual page 196

Checkpoint
E50D
E50E
E50F
E51F
E520
E521
E522
E523
E524
E525
176 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
Description
Copy all of the I/O data
Copy all of the RIO hub information
Clean up the error registers
End of I/O configuration
Set up the RIO architecture registers
Set up interrupts for the current RIO hub
Set up miscellaneous registers for the
current RIO hub
Initialize data structures and enable all RIO
hub ports
Determine I/O configuration of current RIO
hub
Set up the ETE of the current RIO hub
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Replace the RIO riser card specified by
the location code.
3. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Replace the RIO riser card specified by
the location code.
3. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Replace the RIO riser card specified by
the location code.
3. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Replace the RIO riser card specified by
the location code.
3. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Replace the RIO riser card specified by
the location code.
3. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Replace the RIO riser card specified by
the location code.
3. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Replace the RIO riser card specified by
the location code.
3. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.