IBM pSeries 630 6C4 Service Manual page 191

Checkpoint
E1A4
E1A5
E1A6
E1A7
E1A8
E1A9
E1AA
E1AB
E1AC
E1AD
E1AE
E1AF
E1B1
Description
User requested boot to SMS menus via
HMC or CSP command
User requested boot to open firmware
prompt via HMC or CSP command
User requested boot using default service
mode boot list via HMC or CSP command
User requested boot using customized
service mode boot list via HMC or CSP
command
System booting to open firmware prompt
Description: System booting to SMS menus
Action/Possible Failing FRU:
1. If a graphics adapter is driving the console display, connect a laptop (and cable PN
62H4857) to serial port 1 on the processor subsystem. If the SMS menus appear on
the laptop you may have a problem with the display. Go to the "Quick Entry MAP" on
page 63 with the display problem symptom.
2. If the SMS menus do not appear on the laptop in step 1 or a graphics adapter is not
driving the console display, go to "MAP 1540: Problem Isolation Procedures" on
page 124.
System NVRAM settings during boot
System booting using default service mode
boot list
System booting using customized service
mode boot list
System booting to operating system
System booted to multiboot menu via
NVRAM settings
System booted to utilities menu via NVRAM
settings
Create serial node
Action/
Possible Failing FRU
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. This checkpoint is posted on the
operator panel when system firmware
has entered the boot devices menu in
SMS because the multiboot flag was
turned on. The firmware is waiting for
user input. If the firmware console is not
open, the boot devices menu will not be
seen, and the system will appear to be
hung even though it is not. System
firmware will only progress past this
point when the required input is
provided.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Chapter 4. Checkpoints
171