IBM pSeries 630 6C4 Service Manual page 256

Table 4. Firmware Error Codes. (continued)
Error Code Description
20FF0024 Invalid VPD (84/90 tag length is more than 2KB
- vendor-defined tag)
20FF0026 Invalid VPD (tag is not recognized)
20FF0030 Invalid VPD (VPD data bad)
20FF0060 Invalid VPD (VPD length is zero)
20FF0070 Invalid VPD (cannot find the beginning of the
keyword)
20FF0072 Invalid VPD (cannot find the beginning of the
keyword)
20FF0073 Invalid VPD (cannot find the beginning of the
keyword)
20FF0090 Invalid VPD (empty VPD data from the service
processor mailbox command)
20FF00A0 Invalid VPD (getvpd mailbox command failed)
20FF00B0 Invalid VPD (the FG keyword is not found for a
fabric card)
20FF00B1 Invalid VPD (cannot find RM keyword)
236 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
Action/
Possible Failing FRU
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.