Language; Error Condition - Picotest M3500A User Manual

4.4.8 Language

M3500A supports two languages: DEFAULT (M3500A) and COMPATIBLE.
How to set up the language
Press MENU and then use
ENTER to select it. Again use
Press ENTER to select it. Use
COMPATIBLE. Press ENTER on your selection. The locations of the
buttons are shown with red rectangle frames in Figure 4-34.

4.4.9 Error Condition

The error annunciator on the front panel display tells about the error
condition of the multimeter. If there are one or more syntax or hardware
Figure 4-33
and to locate "SYSTEM" submenu. Press
◁ ▷
and
◁ ▷
and to switch to DEFAULT (M3500A) or
◁ ▷
Figure 4-34
107 107
107 107
to locate "LANGUAGE" submenu.