(Percent) - Picotest M3500A User Manual

Press CONFIG + RATIO, and then use and buttons to locate
◁ ▷
"RESOLUTION" option (Refer to 4.1.3) and "FILTER" option (Refer to
4.1.2.2). Press ENTER to make choices. Then select desired value for it
by pressing and button. Press ENTER to choose it. For
◁ , ▷ , △ ▽
operating this function, please press RATIO button and observe the
reading on the display as shown as Figure 4-14.
Note: To close this function, please press one of the measurement
※
function buttons.
Note: The max. DC input voltage is 1000 V, and the max. DC
※
reference voltage is 200 V.
Figure 4-14
Remote Interface Operation
Use the following command to make a RATIO measurement.
CONFigure:VOLTage:DC:RATio {<range>|MIN|MAX|DEF},{<resolution>|MIN|MAX|DEF}

4.3.2 % (Percent)

Definition
This mathematical function calculates the ratio of a measurement
reading to a specified target value as the form of percentage. The
calculation formula is shown below:
80 80 80 80