Upkeep Of M3500A; Safety Information - Picotest M3500A User Manual

equipment may be damaged.
The equipment has been strictly tested for quality before delivery
from our factory. However, this equipment must not be used in
dangerous situations where damage may result.
This product should be placed in a safe area in case of unpredictable
personnel use.
The rear protective conduct terminal needs to be connected to the
actual earth ground or electric shock may occur.
The patent and related documents for the equipment belong to
PICOTEST CORP. and they aren't allowed to be used by others
without permission.

1.4 Upkeep of M3500A

Although M3500A multimeter is very durable and weather resistant,
care should be taken not to expose it to severe impact or pressure.
Keep M3500A far from water and damp environment.
Calibration will be taken every year. Please contact with your local
service representative for more information.
If the incorrect display or abnormal beeps occurred you should stop
using the equipment at once.
Do not use the Meter around explosive gas or inflammable vapor.
Wipe the surface of M3500A multimeter with a piece of dry and clean
cloth.

1.5 Safety Information

Caution! Please read through the following safety information
before using the product.
To avoid possible electric shock or personal injury, please read and follow
these guidelines carefully:
Follow the guidelines in this manual and DO NOT use the Meter if the
case is damaged. Check the Meter case and terminals, and make sure
9 9 9 9