Problems with Remote Management
PROBLEM
Cannot access
Refer to the Remote Management Limitations section in the Remote Management
the ZyWALL
chapter for scenarios when remote management may not be possible.
from the LAN
When NAT is enabled:
or WAN.
Refer to the Problems with the LAN Interface section for instructions on checking your
LAN connection.
Refer to the Problems with the WAN Interface section for instructions on checking your
WAN connection.
Troubleshooting
Chart A-8 Troubleshooting Telnet
Use the ZyWALL's WAN IP address when configuring from the WAN.
Use the ZyWALL's LAN IP address when configuring from the LAN.
ZyWALL Series Internet Security Gateway
CORRECTIVE ACTION
A-5