ZyXEL Communications ZyWall 10W User Manual page 535

Zywall series internet security gateway

Hide thumbs Also See for ZyWall 10W:

Table of Contents

If you selected Weekly in the How Often field above, then select the day(s)

when the set should activate (and recur) by going to that day(s) and pressing

[SPACE BAR] to select Yes, then press [ENTER].

Enter the start time when you wish the schedule set to take effect in hour-

minute format.

Enter the maximum length of time this connection is allowed in hour-minute

Forced On means that the connection is maintained whether or not there is a

demand call on the line and will persist for the time period specified in the

Duration field.

Forced Down means that the connection is blocked whether or not there is a

demand call on the line.

Enable Dial-On-Demand means that this schedule permits a demand call on

Disable Dial-On-Demand means that this schedule prevents a demand call

on the line.

When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save

your configuration, or press [ESC] at any time to cancel.

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11

from the Main Menu and then enter the target remote node index. Press [SPACE BAR] and then [ENTER]

to select PPPoE in the Encapsulation field to make the schedule sets field available as shown next.

Call Scheduling

Table 39-1Schedule Set Setup Fields

ZyWALL Series Internet Security Gateway

Troubleshooting

Zywall 30w Zywall 100 Zywall 50