ZyXEL Communications ZyWall 10W User Manual page 554

ZyWALL Series Internet Security Gateway
FIELD
Encryption Press [SPACE BAR] to choose from NULL, DES and 3DES and then press
Algorithm [ENTER]. Fill in the Key1 field below when you choose DES and fill in fields
Key1 to Key3 when you choose 3DES. Select NULL to set up a tunnel
without encryption. When you select NULL, you do not enter any encryption
keys.
Key1 Enter a unique eight-character key. Any character may be used, including
spaces, but trailing spaces are truncated.
Fill in the Key1 field when you choose DES and fill in fields Key1 to Key3
when you choose 3DES.
Key2 Enter a unique eight-character key. It can be comprised of any character
including spaces (but trailing spaces are truncated).
Key3 Enter a unique eight-character key. It can be comprised of any character
including spaces (but trailing spaces are truncated).
Authentication Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER].
Algorithm
Key Enter the authentication key to be used by IPSec if applicable. The key must
be unique. Enter 16 characters for MD5 authentication and 20 characters for
SHA-1 authentication. Any character may be used, including spaces, but
trailing spaces are truncated.
AH Setup The AH Setup fields are N/A if you chose an ESP Active Protocol.
SPI (Decimal) The SPI must be from one to four unique decimal characters ("0" to "9")
long.
Authentication Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER].
Algorithm
Key Enter the authentication key to be used by IPSec if applicable. The key must
be unique. Enter 16 characters for MD5 authentication and 20 characters for
SHA-1 authentication. Any character may be used, including spaces, but
trailing spaces are truncated.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
40-16
Table 40-5 Menu 27.1.1.2: Manual Setup
DESCRIPTION EXAMPLE
DES
89abcde
MD5
123456789a
bcde
N/A
N/A
N/A
VPN/IPSec Setup