Figure 30-2 Menu 11.3: Applying Nat To The Remote Node - ZyXEL Communications ZyWall 10W User Manual

Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.

Figure 30-2 Menu 11.3: Applying NAT to the Remote Node

The following table describes the fields in this screen.
FIELD
Network When you select this option the SMT will use Address Mapping Set 1
Address (menu 15.1 - see section 30.2.1 for further discussion). You can
Translation configure any of the mapping types described in the web configurator
parts of this User's Guide. Choose Full Feature if you have multiple
public WAN IP addresses for your ZyWALL.
When you select Full Feature you must configure at least one
address mapping set!
NAT is disabled when you select this option.
When you select this option the SMT will use Address Mapping Set
255 (menu 15.1 - see section 30.2.1). Choose SUA Only if you have
just one public WAN IP address for your ZyWALL.
NAT
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= Full Feature
Metric= N/A
Private= N/A
RIP Direction= None
Version= N/A
Multicast= None
Table 30-1 Applying NAT in Menus 4 & 11.3
DESCRIPTION
ZyWALL Series Internet Security Gateway
OPTIONS
Full Feature
None
SUA Only
30-3