Figure 22-3 Main Menu (Zywall 100) - ZyXEL Communications ZyWall 10W User Manual

OPERATION KEYSTROKES
Entering Fill in, or press
information [SPACE BAR], then
press [ENTER] to
select from choices.
Required fields <? >
N/A fields <N/A>
Save your [ENTER]
configuration
Exit the SMT Type 99, then press
[ENTER].
22.3.1 Main Menu
After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next. Not all models
have all the features shown.
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
The following table describes the fields in this screen.
Introducing the SMT
Table 22-1 Main Menu Commands
You need to fill in two types of fields. The first requires you to type in
the appropriate information. The second allows you to cycle through
the available choices by pressing [SPACE BAR].
All fields with the symbol <?> must be filled in order be able to save
the new configuration.
Some of the fields in the SMT will show a <N/A>. This symbol refers
to an option that is Not Applicable.
Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data on the
screen will take you, in most cases to the previous menu.
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
ZyWALL 100 Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
5. DMZ Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Enter Menu Selection Number:

Figure 22-3 Main Menu (ZyWALL 100)

ZyWALL Series Internet Security Gateway
DESCRIPTION
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
25. IP Routing Policy
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
22-3