ZyWALL Series Internet Security Gateway
The following table describes the labels in this screen.
LABEL
File Path
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two minutes.
Do not turn off the device while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into the device
again.
The device automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
21-6
Figure 21-5 Firmware Upload
Figure 21-6 Firmware Upload In Process
Figure 21-7 Network Temporarily Disconnected
DESCRIPTION
Maintenance