ZyXEL Communications ZyWall 10W User Manual page 653

LOG MESSAGE
Rule [%d] Phase 1 ID mismatch
Rule [%d] Phase 1 hash mismatch
Rule [%d] Phase 1 preshared key
mismatch
Rule [%d] Tunnel built successfully
Rule [%d] Peer's public key not
found
Rule [%d] Verify peer's signature
failed
Rule [%d] Sending IKE request
Rule [%d] Receiving IKE request
Swap rule to rule [%d]
Rule [%d] Phase 1 key length
mismatch
Rule [%d] phase 1 mismatch
Rule [%d] phase 2 mismatch
Rule [%d] Phase 2 key length
mismatch
Log Descriptions
ZyWALL Series Internet Security Gateway
Chart S-13 IKE Logs
The listed rule's IKE phase 1 ID did not match between the
router and the peer.
The listed rule's IKE phase 1 hash did not match between
the router and the peer.
The listed rule's IKE phase 1 pre-shared key did not match
between the router and the peer.
The listed rule's IPSec tunnel has been built successfully.
The listed rule's IKE phase 1 peer's public key was not
found.
The listed rule's IKE phase 1verification of the peer's
signature failed.
IKE sent an IKE request for the listed rule.
IKE received an IKE request for the listed rule.
The router changed to using the listed rule.
The listed rule's IKE phase 1 key length (with the AES
encryption algorithm) did not match between the router and
the peer.
The listed rule's IKE phase 1 did not match between the
router and the peer.
The listed rule's IKE phase 2 did not match between the
router and the peer.
The listed rule's IKE phase 2 key lengths (with the AES
encryption algorithm) did not match between the router and
the peer.
DESCRIPTION
S-13