Appendix Q Certificate Commands - ZyXEL Communications ZyWall 10W User Manual

The following describes the certificate commands. See the Command Interpreter appendix for information
on the command structure.
COMMAND
my_cert
create
create
create
Certificate Commands
All of these commands start with certificate.
Chart Q-1 Certificate Commands
selfsigned Create a self-signed local host certificate. <name> specifies a
<name> descriptive name for the generated certificate. <subject>
<subject>
specifies a subject name (required) and alternative name
[key size]
(required). The format is "subject-name-
dn;{ip,dns,email}=value". If the name contains spaces, please
put it in quotes. [key size] specifies the key size. It has to be an
integer from 512 to 2048. The default is 1024 bits.
request Create a certificate request and save it to the router for later
<name> manual enrollment. <name> specifies a descriptive name for
<subject>
the generated certification request. <subject> specifies a
[key size]
subject name (required) and alternative name (required). The
format is "subject-name-dn;{ip,dns,email}=value". If the name
contains spaces, please put it in quotes. [key size] specifies
the key size. It has to be an integer from 512 to 2048. The
default is 1024 bits.
ZyWALL Series Internet Security Gateway
Certificate Commands
DESCRIPTION
Appendix Q
Q-1