Introduction To Https - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
18.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1. A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web
service.
2. You have disabled that service in one of the remote management screens.
3. The IP address in the Secure Client IP field does not match the client IP address. If it does not
match, the ZyWALL will disconnect the session immediately.
4. There is already another remote management session with an equal or higher priority running. You
may only have one remote management session running at one time.
5. There is a firewall rule that blocks it.
18.1.2 Remote Management and NAT
When NAT is enabled:
Use the ZyWALL's WAN IP address when configuring from the WAN.
Use the ZyWALL's LAN IP address when configuring from the LAN.
18.1.3 System Timeout
There is a default system timeout of five minutes (three hundred seconds) for either the console port or
telnet/web/FTP connections. Your ZyWALL automatically logs you out if you do nothing in this timeout
period, except when it is continuously updating the status in menu 24.1. See the System screen to change the
timeout period in the Administrator Inactivity Timer field or use the sys stdio command.

18.2 Introduction to HTTPS

HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a web protocol that
encrypts and decrypts web sessions. Secure Socket Layer (SSL) is an application-level protocol that enables
secure transactions of data by ensuring confidentiality (an unauthorized party cannot read the transferred
18-2 Remote Management Screens