Table of Contents
Advertisement
Fax
Specifying a Destination Using a One-Touch Button
You can use the one touch buttons to specify recipients.
One-touch buttons correspond to the address numbers from 0001 to 0052, or 0001 to
0045.
For example, when the number you want to dial is registered to the address number 0001,
press one touch button <1>.
Reference
Note
4
1
Press a one touch button. Confirm that the recipient (fax number) specified with the one-
touch button is displayed on the touch screen.
Important
Note
246
For information on how to register address numbers, refer to "Tools" > "Setup" > "Add Address Book Entry" in the Administrator
Guide.
There are two ways in which address numbers and stored programs are assigned to the one- touch buttons.
Select either of the following. By default, [Type 1] is selected.
[Type 1]
The buttons 1 to 52 are used for address numbers and they correspond to the registered address numbers
0001 to 0052, while the buttons 53 and 54 are used for stored programs and they correspond to the
registered stored programs 1 and 2.
[Type 2]
The buttons 1 to 45 are used for address numbers and they correspond to the registered address numbers
0001 to 0045, while the buttons 46 to 54 are used for stored programs and they correspond to the
registered stored programs 1 to 9.
The one-touch buttons have a sensor to detect which page of one touch buttons (1 - 18, 19 - 36, or 37 - 54) is
currently opened. Before pressing a one touch button, turn over the one touch panel completely, and take off
your hand from the panel. Do not press the button while you are turning over the panel.
Do not place any objects near the one-touch buttons, nor spill any liquid over them.
To specify multiple recipients, press the one touch buttons continuously.
Turn the one touch panel over to press the one touch buttons 19 and above.
One touch buttons
Advertisement
Table of Contents
