Table of Contents
Advertisement
Copy
Output Color (Selecting the Color for Copying)
This feature allows you to select copy colors.
Note
1
Select a color mode.
Auto Detect
3
The machine automatically determines the colors of the original document and makes
copies in full color if the original document is colored, and in single color (black) if the
document is black-and-white.
Note
Reference
Color
Copies in full color.
Black & White
Copies in black and white regardless of the colors in the original document.
Dual Color Red/Black
Copies color documents using two colors.
Reference
Single Color Red
Copies color documents using one color.
Reference
118
If the use of certain colors is not allowed, the available colors will be restricted. For more information, refer to
"Tools" > "Accounting" > "Create/View User Accounts" > "Service Access" in the Administrator Guide.
If a color document is in one of the following conditions, the machine may copy the document in black and
white.
The colored area is too small.
The colors are too light.
In that case, change a level from the five levels which is used for the machine to recognize color. For more
information, refer to "Tools" > "Common Service Settings" > "Image Quality Adjustment" > "Image Quality"
> "Output Color Recognition" in the Administrator Guide.
For more information, refer to "Tools" > "Common Service Settings" > "Image Quality Adjustment" > "Image Quality" > "Output
Color Recognition" in the Administrator Guide.
You can change the two colors. For more information, refer to "Tools" > "Copy Service Settings" > "Copy Defaults" > "Dual Color -
Target Area Color" and "Dual Color - Non-target Area Color" in the Administrator Guide.
You can change the red color to another one on the screen displayed after selecting [More] > [Single Color] > [Color]. For more
information, refer to "Tools" > "Copy Service Settings" > "Copy Defaults" > "Single Color" in the Administrator Guide.
Advertisement
Table of Contents
