Fuji Xerox DocuCentre-V C2263 User Manual page 73

Opening the document cover
Note
When the machine enters the Sleep mode, it takes longer time to exit the Power Saver mode than when the
machine enters the Low Power mode.
When the following devices are connected to the machine and a user performs the
following operation, the Low Power mode can be deactivated without pressing the <Power
Saver> button.
Touch the IC Card Reader (optional) with a card.
Note
The Sleep mode cannot be deactivated by the operations. When the above devices are connected to the
machine, you can make the machine exit the Power Saver mode without pressing the <Power Saver> button
by setting longer time to elapse until the machine enters the Sleep mode.
When the machine enters the Sleep mode during connecting the IC Card Reader (optional), it may take
longer time to exit the Power Saver mode.
Making devices necessary to activate the machine exit the Power Saver mode
The machine is equipped with the feature to save electricity by supplying power only to the
devices necessary to activate the machine when the machine exits the Power Saver mode.
When the <Power Saver> button is pressed, the touch screen is lit on, but the document
feeder and the output devices do not exit the Power Saver mode. Afterwards, by selecting a
service on the touch screen, the machine supplies power only to the devices necessary to
activate the service.
Note
When the machine receives jobs such as print and print fax, the touch screen does not lit on and only the
output devices exit the Power Saver mode and start to print.
When the machine receives jobs such as stored print (Secure print, Delayed print, Charge print, and Private
charge print), direct fax, and fax using folder receive, and when you access a folder of the machine using
CentreWare Internet Services, the touch screen does not lit on and only the hard disk exits the Power Saver
mode.
The machine cannot load papers and replace consumables appropriately when the
machine is in the Power Saver mode. Press the <Power Saver> button and then <Machine
Status> button to load papers and replace consumables.
Power Saver Mode
2
73