Split Send (Sending In Sections); File Name (Specifying A Name For The File To Be Sent); Split By Page; Split By Data Size - Fuji Xerox DocuCentre-V C2263 User Manual

Scan

Split Send (Sending in Sections)

When using the E-mail service, and the size of the data to be attached is large, you can split
the data at page breaks or by a certain data size and then send the data.
Reference
1
Select [Split Send].
2
Select any option.
5

Split by Page

The data is split at page breaks.
Note

Split by Data Size

The data is split by a certain data size.
Note

File Name (Specifying a Name for the File to be Sent)

When using the E-mail, Scan to PC, Network Scanning, or Store & Send Link service, you can
specify a name for the file to be sent.
422
For information on [Split Send], refer to "Tools" > "E-mail/Internet Fax Service Settings" > "E-mail Control" > "Split Send Method" in
the Administrator Guide.
[Split by Page] is available only when [File Format] on the [E-mail] screen is set to [PDF], [DocuWorks], or
[XPS]*, or when [File Format] is set to [TIFF] with [Single File for Each Page] check box not selected.
*: XPS stands for XML Paper Specification.
Select this option if your e-mail application supports message/partial.