Original Type (Selecting The Document Type); Resolution (Specifying The Scanning Resolution) - Fuji Xerox DocuCentre-V C2263 User Manual

Original Type (Selecting the Document Type)

You can select the type of the original document, such as text and photo documents.
1
Select the original type.
Text
Select this option when transmitting a document that contains only text.
Photo & Text
Select this option when transmitting a document that contains both text and photos. The
machine automatically distinguishes the text and photo areas and sets the appropriate
image quality for each area of the document.
Photo
Select this option when transmitting a document that contains only photos.
Note
If reduced in size, the scan documents may have stripes in their photo areas.

Resolution (Specifying the Scanning Resolution)

You can set the resolution for the documents to be scanned.
Note
The machine scans a document at the specified resolution, but if the recipient's machine does not support
the resolution, the machine automatically changes the resolution to one supported by the recipient's
machine and there is a corresponding loss in quality.
The higher the resolution, the lower the transmission speed. Usually, we recommend that you select
[Superfine (400 dpi)] or lower.
Reference
You can specify the resolution for each address number. For information on how to register address numbers, refer to "Tools" >
"Setup" > "Add Address Book Entry" in the Administrator Guide.
1
Select the resolution.
Fax/Internet Fax
4
255