Table of Contents
Advertisement
Copy
background is printed as embossed or outline text depending on the option you select on
the [Watermark Effect] screen.
Note
1
Select any option.
Off
3
Prints the text specified in [Stored Watermarks] as it is.
Embossed
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as embossed text.
Outline
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as outline text.
Reference
Folding (Outputting Bi-Folded)
This feature allows you to fold copies in half, or crease in half.
Important
Note
1
Select [Folding].
172
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
You can specify the size, density, and other settings for text to be printed with Watermark in the System Administration mode. For
more information, refer to "Tools" > "Common Service Settings" > "Watermark" in the Administrator Guide.
When the Finisher-B1 is installed, do not remove output copies from the finisher tray until all the output
copies have been delivered.
The supported paper orientation is only
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
. Select the tray whose orientation is set to
.
Advertisement
Table of Contents
