Table of Contents
Advertisement
Stored Programming
Calling a Stored Program
The following describes how to call a stored program.
When you call a specified stored program, the last screen shown when you registered the
stored program appears.
1
Press the <Services Home> button.
2
Select [Stored Programming].
8
3
Select a number of a stored program containing the features you want to use.
Note
Reference
466
You can only select registered numbers.
Select [
] to return to the previous screen or [
Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.84).
After the stored program has been called, the machine sounds an audible tone. If a failure occurs, the
machine sounds a fault tone.
For information on how to change the volume of the sound that notifies that a stored program has been called, refer to "Tools" >
"Common Service Settings" > "Audio Tones" > "Stored Programming Complete Tone" in the Administrator Guide.
] to move to the next screen.
Advertisement
Table of Contents
