Table of Contents
Advertisement
6. Press the <RESET> button to exit the test mode.
<RESET> button
If the circuit does not work properly, contact your local Fuji Xerox representative.
A ground fault interrupter is embedded in this product. If current leakage occurs, the
ground fault interrupter automatically cuts off power circuit to prevent electric shock and a
fire accident.
The ground fault interrupter is normally ON. Check once a month if the ground fault
interrupter works properly in accordance with the following procedures:
1. Switch the power off.
When the Finisher B-1 (optional) is installed.
2. Make sure that the touch screen is blank and the <Power Saver> button does not light
up.
3. Open the front cover.
<TEST> button
Safety Notes
1
29
Advertisement
Table of Contents
