Table of Contents
Advertisement
Copy
Crease
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is installed.
The copies are creased in half. The number of copies that can be creased is up to 5. When
the number is more than 5, the document is output by every 5 sheets.
Crease & Staple
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is installed.
The copies are creased in half and stapled at the center. The number of copies that can be
creased and stapled is 2 to 15.
Covers (Attaching Covers to Copies)
This feature allows you to attach covers to copies.
You can use different types of paper (such as colored paper and heavyweight paper) as the
front and back covers of copies.
Note
3
1
Select [Covers].
2
Select any option.
Front Cover
Attaches a front cover to the copies.
Off
No front cover is attached.
Blank Cover
Blank sheets of paper are attached as front covers.
Print on Side 1
The first page of the document is copied on the front side of the front cover.
Print on Side 2
The first page of the document is copied on the back side of the front cover.
Print on Both
The first and second pages of the document are copied on the front and back sides of the
front cover.
156
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
Advertisement
Table of Contents
