To Set The "Remote Monitor" Function - Konica Minolta FX-3 User Manual

5

To set the "REMOTE MONITOR" function

1
Select the "ADMIN.
MANAGEMENT" menu.
H Refer to "To select the "ADMIN.
MANAGEMENT" menu" on
page 5-7.
2
Press the [3] key from the 10-Key
Pad to select "REMOTE
MONITOR".
H Using the 10-Key Pad, enter the
6-digit administrator access number, and then press the [Yes] key.
3
Using the [ ] and [ ] keys, select
"LIMITED", "FULL" or "OFF", and
then press the [Yes] key.
H If "LIMITED" or "OFF" was
selected, the "ADMIN. MANAGEMENT" menu appears again.
H If "FULL" was selected, a screen appears, allowing you to enter the
password.
4
Using the 10-Key Pad, enter the 4-
digit password, and then press the
[Yes] key.
The "ADMIN. MANAGEMENT"
menu appears again.
5-8
Ö
Using the Utility Mode
Fax Kit (FX-3)