Settings Relating To Signal Inputs (Input Menu); Setting The Initial Crop - Sony MVS-8000X System User Manual

Settings Relating to Signal Inputs (Input
Menu)
To make settings relating to DME input signals, display the DME >Input
menu.
To display the Input menu
In the Engineering Setup menu, select VF4 'DME' and HF1 'Input.'
The status area shows the initial crop information and the DME system phase.
The following functions are available here.
• Initial Crop: Make the initial crop setting.
• Matte Illeg. Color Limit: Switch the illegal limiter for the signal generated
• System Phase: Adjust the operation timing of the whole system with respect
When the signal format is 1080P, up to four DMEs can be operated (DME1 to
DME4).
In the following description, the settings for DME1 are given by way of
example, but the settings for DME2 to DME4 are carried out in a similar way.

Setting the Initial Crop

1
2
1068

Settings Relating to Signal Inputs (Input Menu)

by the DME internal matte generator on or off.
to the reference signal.
In the DME1 <Aspect> group of the DME >Input menu, select the screen
aspect ratio (16:9 or 4:3).
In the DME1 <Crop> group, press [Initial Crop] and adjust the following
parameters.
• If you selected 4:3 in step 1
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
Adjustment
Position of top side
Position of left side
Position of right side
Position of bottom side
Setting values
–3.00 to +3.00
–4.00 to +4.00
–4.00 to +4.00
–3.00 to +3.00