Sony MVS-8000X System User Manual page 1139

Icon Title Message
Activate The license key you entered is
License invalid.
Please check and enter again.
Activate License key was successfully
License entered.
The license will be activated
after rebooting your system.
Append [Append Key Frame] cannot be
Key Frame executed.
FMx is not assigned to a user
region.
[Append Key Frame] cannot be
executed.
Key Frame Register is locked.
(UserX)
[Append Key Frame] cannot be
executed.
Key Frame Register is busy.
(UserX)
[Append Key Frame] cannot be
executed.
Key Frame Register is being
edited. (UserX)
[Append Key Frame] cannot be
executed.
Key Frame Register is full.
(UserX)
[Append Key Frame] cannot be
executed.
Key Frame Register is not
active.(UserX)
Backup FM file auto extraction is
running (–3).
Description
7316.7: Engineering Setup >System >Install/
Unit Config >License >License Management
In the above menu, since the entered
information was incorrect, the Activate License
procedure failed. Check the license key, and
enter again.
7316.7: Engineering Setup >System >Install/
Unit Config >License >License Management
In the above menu, the Activate License
procedure completed successfully.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame], but it failed
because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the
Engineering Setup >Switcher >Config >User1-8
Config menu, and try again.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a locked
register (UserX region). Unlock the register.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) into which files are being
loaded. Try again after file loading has finished.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) with which a keyframe creating
or editing operation is proceeding. Try again
after the keyframe operation has finished.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) in which no keyframe remains.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
for which the appropriate region selection
button in the numeric keypad control block is
not selected. Try again after you select the
region selection button [UserX] in the numeric
keypad control block.
2564:Frame Memory >External Device
>Backup to DDR/VTR
When [Backup Start] was pressed in the above
menu, extraction of frame memory file data onto
the VTR was being executed.
1139
Error Messages