Selecting Key Fill And Key Source - Sony DVS-9000 System User Manual

less than a certain luminance are treated as shadows, there is no effect on
cutting out of the foreground.
1
In the Chroma Adjust menu, set [Shadow] on.
2
Adjust the following parameters.
Knob
1
2
3
4
Note
When chroma key shadow is on, key edge is changed to normal, and soft edge
is switched off.
Adjusting the video signal
You can change the gain of the foreground signal, or vary the Hue. There are
separate adjustments for the gain of the whole video signal, or Y and C
individually.
1
In the Chroma Adjust menu, set [FRGD CCR] on.
2
Adjust the following parameters.
Knob
1
2
3
4

Selecting Key Fill and Key Source

Selecting key fill and key source

To select key fill and key source for key 1 on the M/E-1 bank, use the following
procedure.
1
In the M/E-1 >Key1 menu, select HF1 'Type.'
Parameter Adjustment
Luminance Reference luminance for shadows 0.00 to 100.00
Gain Shadow key gain
Density Shadow opacity
Soft Shadow softness
Parameter Adjustment
Video Gain Overall gain of video signal
Y Gain Y signal gain
C Gain C signal gain
Hue Hue offset amount
Setting values
–100.00 to +100.00
0.00 to 100.00
0.00 to 100.00
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–180.00 to +180.00
Key Setting Operations Using Menus
165