Summary Of Diagnostic And Related Commands; Kill And Kill_Diags - DEC 4000 AXP Service Manual

3.1.13 kill and kill_diags

The and
kill kill_diags
executing .
• The kill command terminates a specified process.
• The command terminates all diagnostics.
kill_diags
Synopsis:
kill_diags
kill [PID . . . ]
Arguments:
[PID . . . ] The process ID of the diagnostic to terminate. Use the
command to determine the process ID.

3.1.14 Summary of Diagnostic and Related Commands

Table 3–1 provides a summary of the diagnostic and related commands.
Table 3–1 Summary of Diagnostic and Related Commands
Command Function
Acceptance Testing
test Test the entire system, subsystem, or specific device.
Error Reporting and Diagnostic Status
show fru Reports system bus and Futurebus+ FRUs,
module identification numbers, and summary error
information.
show_status Reports the status of currently executing
test/exercisers.
show error Reports some errors captured by diagnostics and
operating system.
commands terminates diagnostics that are currently
show_status
Reference
Section 3.1.1
Section 3.1.2
Section 3.1.3
Section 3.1.4
(continued on next page)
Running System Diagnostics 3–21